BMG (MGN15,V6,CoreXY)¶
Description
Remember to insert a 53.8 mm PTFE tube between the V6 and the BMG
Required sub assembiles¶
| Name | Link |
|---|---|
| Bottom Short | Bottom Short |
| CoreXY Back | CoreXY Back |
| Face V6 | Face V6 |
| Top BMG | Top BMG |
Full Parts BOM¶
| Name | Qty | Type | Link |
|---|---|---|---|
| bottom_mgn15_short_duct | 1.0 | printed | GitHub |
| DIN 912 M3 20 mm | 5.0 | hardware | |
| Duct v2 Straight Risen | 1.0 | printed | GitHub |
| M3 Hex nut | 18.0 | hardware | |
| back_corexy_90deg | 1.0 | printed | GitHub |
| DIN 912 M5 35 mm | 2.0 | hardware | |
| tension_slider_9mm_belt_M5_mirror | 1.0 | printed | GitHub |
| tension_slider_9mm_belt_M5 | 1.0 | printed | GitHub |
| 5015 fan | 1.0 | hardware | |
| M5 Hex nut | 2.0 | hardware | |
| cable_side | 1.0 | printed | GitHub |
| unversal_cable_mount | 1.0 | printed | GitHub |
| DIN 912 M3 10 mm | 4.0 | hardware | |
| DIN 912 M3 12 mm | 7.0 | hardware | |
| face_v6 | 1.0 | printed | GitHub |
| DIN 912 M3 40 mm | 4.0 | hardware | |
| face_v6_40mm_fan | 1.0 | printed | GitHub |
| 4010 FAN | 1.0 | hardware | |
| V6-175-SINK | 1.0 | hardware | |
| V6-300-BREAK | 1.0 | hardware | |
| V6-BLOCK-CARTRIDGE | 1.0 | hardware | |
| V6-NOZZLE-ALL | 1.0 | hardware | |
| SOCK | 1.0 | hardware | |
| DIN 912 M3 35 mm | 2.0 | hardware | |
| top_mgn15_bmg | 1.0 | printed | GitHub |