BMG (MGN12,Mosquito,Cartesian)¶
Description
Remember to insert a 45.6 mm PTFE tube between the Mosquito and the BMG
Required sub assembiles¶
| Name | Link |
|---|---|
| Bottom Short | Bottom Short |
| Cartesian Back | Cartesian Back |
| Face Mosquito | Face Mosquito |
| Top BMG | Top BMG |
Full Parts BOM¶
| Name | Qty | Type | Link |
|---|---|---|---|
| Duct v2 Straight Risen | 1.0 | printed | GitHub |
| M3 Hex nut | 17.0 | hardware | |
| 5015 fan | 1.0 | hardware | |
| DIN 912 M3 12 mm | 7.0 | hardware | |
| DIN 912 M3 35 mm | 5.0 | hardware | |
| mosquito | 1.0 | hardware | |
| 25mm fan | 1.0 | hardware | |
| DIN 912 M3 25 mm | 3.0 | hardware | |
| DIN 912 M2.5 12 mm | 2.0 | hardware | |
| face_mosquito | 1.0 | printed | GitHub |
| mosquito_front | 1.0 | printed | GitHub |
| back_cartesian | 1.0 | printed | GitHub |
| tension_slider_6mm_belt_M3 | 1.0 | printed | GitHub |
| cartesian_cable_fin | 1.0 | printed | GitHub |
| DIN 912 M3 30 mm | 2.0 | hardware | |
| bottom_mgn12_short_duct | 1.0 | printed | GitHub |
| DIN 912 M3 16 mm | 2.0 | hardware | |
| top_mgn12_bmg | 1.0 | printed | GitHub |