BMG (MGN12,Mosquito BMG-M,CoreXY)¶
Description
Remember to insert a 27.9 mm PTFE tube between the Mosquito and the BMG
Required sub assembiles¶
| Name | Link |
|---|---|
| Bottom Short | Bottom Short |
| CoreXY Back | CoreXY Back |
| Face Mosquito | Face Mosquito |
| Top BMG | Top BMG |
Full Parts BOM¶
| Name | Qty | Type | Link |
|---|---|---|---|
| DIN 912 M3 20 mm | 1.0 | hardware | |
| Duct v2 Straight Risen | 1.0 | printed | GitHub |
| M3 Hex nut | 18.0 | hardware | |
| back_corexy_90deg | 1.0 | printed | GitHub |
| DIN 912 M5 35 mm | 2.0 | hardware | |
| tension_slider_9mm_belt_M5_mirror | 1.0 | printed | GitHub |
| tension_slider_9mm_belt_M5 | 1.0 | printed | GitHub |
| 5015 fan | 1.0 | hardware | |
| M5 Hex nut | 2.0 | hardware | |
| cable_side | 1.0 | printed | GitHub |
| unversal_cable_mount | 1.0 | printed | GitHub |
| DIN 912 M3 10 mm | 2.0 | hardware | |
| DIN 912 M3 12 mm | 9.0 | hardware | |
| DIN 912 M3 35 mm | 4.0 | hardware | |
| mosquito | 1.0 | hardware | |
| 25mm fan | 1.0 | hardware | |
| DIN 912 M3 25 mm | 2.0 | hardware | |
| DIN 912 M2.5 12 mm | 2.0 | hardware | |
| face_mosquito | 1.0 | printed | GitHub |
| mosquito_front | 1.0 | printed | GitHub |
| bottom_mgn12_short_duct | 1.0 | printed | GitHub |
| DIN 912 M3 16 mm | 2.0 | hardware | |
| BMG-M_Extruder | 1.0 | hardware | |
| top_mgn12_bmg | 1.0 | printed | GitHub |